How to know if water is hard or soft without using those testing kits?
- John AldenLv 73 months agoBest answer
Wash your hands. Soft water and soap will make lots of lather, feel very slippery and it will seem like you can't get all the soap off. Hard water is the opposite and you will likely have mineral stains on the sink, tub and toilet.
- Anonymous3 months ago
If you boil water in a tea kettle, then look inside the kettle. If there is a white color, that is mineral salts. Which is ALWAYS common with WELLS. If your source water comes from a river or mountain lake that has WAY LESS dissolved minerals in it. Rainwater is just water, there are no minerals. Snow is the same as rainwater. Really, neither are harmful to you as your body just uses some of the dissolved salts for bones and teeth and the rest is eliminated. People have lived for well over 100 years on well water.
- ckngbbblsLv 73 months ago
do you have to add more soap to get suds or does your water suds up a lot even with a small amount of soap?
Lots of suds easily and you have soft water.
Gotta add lots of soap to water to get some suds going? Hard water.
- chrisLv 73 months ago
Find a clean glass or plastic bottle with a tight-fitting cap. Fill the bottle 1/3 full with water straight from the faucet (should be about 8 to 10 ounces).
Add 10 drops of dishwashing liquid; use pure liquid soap (not "detergent") and shake well for at least 10 seconds. Set the bottle down and observe the results:
■ If the soapy solution foams up quickly, creating a lot of suds, and the water below the suds layer is relatively clear, you probably have at least fairly soft water.
■ If the solution does not foam up well, creating only a shallow layer of suds, and the water below the suds is cloudy, you likely have hard water.Source(s): Googled it!
- What do you think of the answers? You can sign in to give your opinion on the answer.
- Pompous HarrisLv 53 months ago
When you shower does your shower gel lather easily or not at all?
Soft water produces more lather than hard water.Source(s): Many pompous years
- Me2Lv 73 months ago
Put a few cups of water in a saucepan with a shiny interior, then boil dry (turn the heat to low when only a film of water remains). The amount of residue indicates the relative hardness.
- boy boyLv 73 months ago
look inside your kettle
- BillLv 63 months ago
put dish washer detergent in it
soft water and it lathers really well
hard water and there will be little froth
- 3 months ago
If it melts plastic don't drink it
- Bone AloneLv 73 months ago
Do you have a humidifier. Pour some water into it and let it run for a few cycles. Turn it off and let the wet area get dry. If you see a lot of white crusty stuff then the water is hard. If you see nothing then it’s soft. Hard water is caused by calcium deposit. Calcium has a higher boiling point than water so if you boil away the water, the calcium deposit remains.